Mold engineering design center

Hard layer, graphic ink layer, electric coating, glass layer, border ink layer, IR ink layer

Jimay Optics Glass cover process include cutting, profiling edge grinding, flat grinding, hardened, printing, optical coating, UV printing, hot bending, explosion-proof membrane, etc., and through the strict control of process quality and reliability, which can realize glass cover 2.5 D / 2 D / 3 D appearance and reliability of the perfect effect

Glass cutting CNC grinding side - flat grinding - ultrasonic cleaning - automatic reinforcement - white piece of purification (1000) - precision screen printing - reliability test - glass optical plating - printing inspection package level 1000 net.

AR: using a vacuum coating to enhance glass transmittance, 550nm single-sided AR T > 95%, double-sided AR T > 99

Low AG: made anti glare etching or spraying layer, roughness Ra 0.1 1.2 um, fog degree 3 to 15, gloss, 50-100 euphotic rate > 80%, also can be made according to different requirements

Low AF: using evaporation or spraying method, the initial Angle of water droplets can reach more than 115 ° and the friction after 3000 times of up to 3000 ° above, sliding friction coefficient of < 0.03

PVD: the process of using vacuum evaporation to make various optical color films.Include metal film, high anti-highlight, AR, etc

NCVM: vacuum electroplating film, which is applied to the optical color of the communication field, and is applied to the optical color

Material: can be steamed and plated with various materials, including AL, H4, SiO 2, Ti3O5 etc

Glass material: 0.4-1.5 mm thick Corning 2320, Corning 5318, NEG, Schott glass